Pre-punching Outlet Hole Flexible Hose Making Machine-manufacture,factory,supplier from China

(Total 24 Products for Pre-punching Outlet Hole Flexible Hose Making Machine)
Convenient and fastThe prepunching outlet water belt adopts a modular design, which is simple and convenient to install.
  Contacta ahora
Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.
  Contacta ahora
Uhmwpe pipe making machine features1. According to our years of experiment and practice, the small screw pitch and big screw diameter are adopted for our UHMWPE pipe extrusion line. The production line can melt the UHMWPE, whose melt index is near 0, and slowly extrude it continuously.2. Our UHMWPE pipe extruder, comparing with normal plastic pipe extrusion machine, doesn’t need the cooling fan for the spiral barrel. Each section of the UHMWPE pipe extrusion machine comes with an independent control system, so the temperature precision and energy efficiency are both great.
  Contacta ahora
Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.
  Contacta ahora
Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contacta ahora
Plastic pipe making machine: It is mainly composed of electrical control production-cabinet-rolling machine-pump-cooling water tank-collection and other parts, which can produce various styles and models of plastic pipes.It is equipped with a special single-screw extruder for polyolefin, which has the characteristics of high-speed foundation and high-speed speed.Professional separate mixing screw for polyolefin.SpecificationPipe diameter12mm16mm20mmWall thickness0.15-0.5mm0.15-0.5mm0.15-0.5mmTolerance±0.05mm±0.05mm±0.05mmApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-scre
  Contacta ahora
Hight-efficiency single screw extruder has 8 strandard sizes:Φ30, Φ45, Φ65, Φ75, Φ90, Φ105, Φ120, Φ150mm, and the L/D ratio is 30:1D-37:1D Effective length. All the equipments are controlled by the PLC/PCC smart modular, further more the automatic control, real-time data record and closed-loop control are realizd. The advantage are high output, high adaptability for differnt raw material, highly stable good-quality extrusion and soon.HDPE pipe features:1.
  Contacta ahora
The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contacta ahora
1. The goods are packed in accordance with requirements of the manufacturing plant and standards of the Chinese People's Republic.2. Each place be fixed in accordance to the particularities of the goods.
  Contacta ahora
Three layers co-extrusion film blowing machine is composed of three single screw extruders, three layer composite co-extrusion die , cooling system, tractor, film coiling device, temperature and electric control system.
  Contacta ahora
According to many years of plastic machinery development and design experience, in the introduction of foreign advancedtechnology and digestion and absorption, on the basis of self-developed HDPE pipe production line.
  Contacta ahora
Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l
  Contacta ahora
Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.
  Contacta ahora
As the viscosity of UHMW-PE molten state reaches up to 108Pa*s, liquidity is poor, and melt index is almost zero, so UHMW-PE is hard to be processed by general mechanical processing method.
  Contacta ahora
PRODUCTION LINE DESCRIPTIONSThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws. This production line is equipped with cutter (saw web or planetary).
  Contacta ahora
main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid
  Contacta ahora
1.    Product introductionThe PE Fusion-bonded Woven Tape Manufacturing Machine is a specialized device used for producing PE (Polyethylene) fusion-bonded woven tape. It utilizes the processes of melting, bonding, and weaving to transform the PE material into woven tape. This type of tape is widely used in fields such as agricultural irrigation, construction projectsWe are committed to providing high-quality woven belt product line that are widely used in various fields such as industrial manufacturing, construction, agriculture, and transportation.
  Contacta ahora
Short description1. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.2.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.3.Our plastic making machine can make many kinds of plastic productions l
  Contacta ahora
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contacta ahora
product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.
  Contacta ahora
Three-layer co-extrusion blown film line by three single screw extruder, three layer composite co-extrusion blown film die head, cooling system, tractor, film reel and temperature and electric control system, mainly used in open width 1350-2000mm three-layer co-extrusion film.  Specification of Packaging Film Blowing Machine CHARACTERISTIC1. Frequency inverters control main motor and traction motor.2. Material of screw and barrel: 38CrMoAl-A after nitrogen treatment.3. Gear box: HARD teeth gear surface, casting alloy piston, high precise grinding, long life.4.
  Contacta ahora
Main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements. Main production specificationEXTRUDERSJ-30/25SJ-45/30SJ-50/28SJ-55/28SJ-65/25SCREW DIAMETER30MM45MM50MM55MM65MMOUTPUT(KG/H)850609555PRODUCTMICRO-SPRAY BELTMOLDING WAYDOWN-BLOWING
  Contacta ahora
Product Application:This product is mainly used for mine escape pipes, fly ash transportation, marine dredging pipes, etc.Supply Ability:10 Set/Sets per Month UHMWPE Pipe Extrusion Mahcine LinePackaging Details:Usually we use a wrapping film to wrap the machine, then fix the machine with a wire rope, or use wood packaging according to your needs.Technical Parameters:Extruder modelSJ-75/20SJ-90/20SJ-150/20SJ-200/20SJ-240/20Pipe OD range40-89mm90-159mm160-500mm500-800mm800-1200mmMotor power15Kw18.5Kw30Kw55Kw75KwOutput(kg/h)Bracket lengthAccording by clients needTotal power<30<45<65<8
  Contacta ahora
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contacta ahora
Relate News
On November 5, 2024, HWYAA Company welcomed two batches of domestic customers from Henan and Qingdao. The customers came mainly to inspect our prefabricated hole water hose equipment. With enthusiasm and professional explanations, the company showed the advanced performance and excellent quality of the prefabricated hole water hose equipment to the customers.
UHMWPE (ultra-high molecular weight) pipe making machine delivery to Ukraine kyiv .Hope everything will be getting better .
On October 20, we received two groups of customers. One group was from Turkey who came to view our new technology production line of prefabricated hole flat-laid water hoses. The other group was from Algeria who came to see our strip drip irrigation tape production line. Recently, our one-step prefabricated hole water hose has received extensive attention from domestic and foreign customers. At present, our company's technology is leading in China, and the entire production line is independently developed and produced, ensuring the compatibility and smoothness of the equipment.
During the period from December 4th to 7th, HWYAA's fourth-generation strip-attached drip irrigation tape manufacturing machine and one-step formed prefabricated hole flat hose manufacturing machine, developed this year, made a remarkable appearance and received extensive recognition at PLASTEURASIA 2024. The fourth-generation inlaid strip-attached drip emitter drip irrigation T tape making machine has remarkable advantages.
In today's society, when people think of packaging, they first think of various packaging bags, boxes and other packaging materials that can be found in supermarkets, pharmacies, and convenience stores. I don't know whether all kinds of large-scale machinery and equipment in the industry also need packaging during transportation.In the face of large-scale machinery and equipment commonly seen in the market, traditional packaging is obviously powerless, but among many flexible packaging materials, packaging film equipment can be used to package large-scale machinery and equipment.
On July 29, 2024, HWYAA plastic machinery welcomed Brazilian customers to visit the falt drip irrigation tape making machine. HWYAA Plastic Machinery is renowned for its advanced technology and excellent quality. This visit demonstrated the attention from the international market. During the visit, professional technicians elaborated on the production line process, technical advantages, and quality control system.
The manufacturing is strong and dependable. the emitter transmits even. the punching position is correct. the chip may be removed without difficulty.It adopts PLC control, which is operated conveniently.According to the production requirement, it can produce products with different specifications after changing the mold, conveying and punching parts.Electrical components adopt domestic famous brand. The servo system adopts imported components.Matched with meters alarming device.It also can be used to produce common dripping pipes. 
The precision of the outlet pressure of the ultra-high polymer pipe equipment is affected by many factors. Here, we briefly introduce how to improve the accuracy of the product.Increase output, reduce energy consumption, realize low-temperature extrusion, and extend equipment life. Install polymer melt pumps on the PVC pipe production line, and transfer the decompression function of the PVC pipe production line to the gear pump. Ultra-high polymer pipe equipment has the characteristics of low voltage and low temperature.
1. To remove the modified cylinder part from the original heater ring. 2. Measure the size of the cylinder, usually including the length of the circumference, calculate the need for insulating wadding, and after the initial estimation of the heating coil power, the position of the winding  is sufficient. 3.Wrap the insulating pad around the cylinder and tie it tightly with a heat-resistant bandage so that the thickness of the insulating pad is about 1.5-2.0cm.
High put on resistance.It's four-7 instances of metal pipes, 3times of hdpe pipes, four instances of nylon pipes.
On August 20, 2024, Jordanian customers came to Huaya factory to visit the strip drip irrigation tape production line. During the visit, the customers paid special attention to and showed great interest in our strip punching detection link.The strip punching detection of the strip drip irrigation tape production line is a key step to ensure product quality.