HDPE Pipe Production lineHDPE pipe extrusion line is developed by HUAYA based on European advanced technology and R&D experience of the plastic machinery for many years.

Pipe AdvantagesHigh wear resistance:It's 4-7 times of steel pipes, 3times of HDPE pipes, 4 times of nylon pipes.

Hight-efficiency single screw extruder has 8 strandard sizes:Φ30, Φ45, Φ65, Φ75, Φ90, Φ105, Φ120, Φ150mm, and the L/D ratio is 30:1D-37:1D Effective length. All the equipments are controlled by the PLC/PCC smart modular, further more the automatic control, real-time data record and closed-loop control are realizd. The advantage are high output, high adaptability for differnt raw material, highly stable good-quality extrusion and soon.HDPE pipe features:1.

HDPE pipe features1. HDPE Pipe Extruding Line adopts DC motor, and Eurotherm DC digital converter and high efficiency screw to ensure high efficiency extrusion.2. HDPE Pipe Extruding Line adapts basket type composite die head, which ensures not only the uniformity of high speed extrusion but also the stable performance of tubular goods3. HDPE Pipe Extruding Line adopts high efficiency double chamber vacuum calibrating technology and spray cooling bath to improve the rate of finished products of tubular goods and meet the demand of high-speed production.

The extrusion line is newly developed based on European technique and systemic study and research of new type pipe production line; It’s suitable for PE,PP and other polyolefine pipes high-speed extrusion.

PVC Pipe Extrusion Line                          ItemNameSpecificationQuantity 1Conical double screw extruderSJSZ65/1321set2Die head & mould1 set3Stainless steel vacuum calibrating tank160x 6m1 set4Caterpillar haul-off machine3kw1 set5Planetary cutter2.2kw1 set6Stacker 6m1 set8Belling machine1 set9MixerSRL-Z200/5001 set10Loader for mixerZD-11 set11CrusherSWP4001 set12Laser printer1 set  PVC pipe production line introduction1.

According to many years of plastic machinery development and design experience, in the introduction of foreign advancedtechnology and digestion and absorption, on the basis of self-developed HDPE pipe production line.

inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.

Product Description:New generation UHMWPE pipe extrusion line uses patented equipments and technology of Huaya company, relizescontinuous extrusion of pipes.

Pipe ApplicationsMine industry.Tailings and mud transport, underground filling pipeline.Coal industry.Coal mine  gas pipe, water supply and drain pipe, ventilation pipes, grouting pipe, slime water in coal washer plant, coal slurry pipelines.Sea or lake salt chemical industry.Sea salt, brine transport pipeline.Thermal power.Fly coal ash, chemical water, recycled water transport pipeline.Petrochemical.Corrosive medium or crude oil pipeline.Food processing.Water and material delivery pipeline.River dredging.Dredging, pumping sands conveying pipe.Public utilities.Sewage discharge, water supp

UHMWPE is often described as the world’s toughest polymer.

Plastic pipe making machine: It is mainly composed of electrical control production-cabinet-rolling machine-pump-cooling water tank-collection and other parts, which can produce various styles and models of plastic pipes.It is equipped with a special single-screw extruder for polyolefin, which has the characteristics of high-speed foundation and high-speed speed.Professional separate mixing screw for polyolefin.SpecificationPipe diameter12mm16mm20mmWall thickness0.15-0.5mm0.15-0.5mm0.15-0.5mmTolerance±0.05mm±0.05mm±0.05mmApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-scre

To shaping the pipe with cooled mold, we add to the nozzle and core rod. Low temperature heat conduction oil will be injected into the pipe through the mold temperature control mechanism to cool the mold and shape the pipe material. In comparison to regular PE pipe extrusion machinery, our UHMWPE pipe extrusion machine is much cheaper due to the absence of vacuum shaping sleeve, vacuum box, and traction machine.

Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.

Uhmwpe pipe making machine features1. According to our years of experiment and practice, the small screw pitch and big screw diameter are adopted for our UHMWPE pipe extrusion line. The production line can melt the UHMWPE, whose melt index is near 0, and slowly extrude it continuously.2. Our UHMWPE pipe extruder, comparing with normal plastic pipe extrusion machine, doesn’t need the cooling fan for the spiral barrel. Each section of the UHMWPE pipe extrusion machine comes with an independent control system, so the temperature precision and energy efficiency are both great.

Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.

main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid

The inlaid cylindrical emitter drip irrigation pipe production line is developed by the combination of our own techniques andadvanced technologies introduced from foreign countries.Product DescriptionTape Diameter12/16/20mmTape Wall Thickness0.6-1.0mmExtruderSJ-75/33Production Speed50m/min(300mm space)PunchingServo motorExtruding Capacity120KgApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Material:38CrMoALAScrew diameter (mm):75 mmScrew L/D Ratio:33:01:00Screw Speed (rpm):90 rpmShowroom Location:India, Mexico, Russia, South Korea, South Africa, UkrainePlace of

The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu

Product Application:This product is mainly used for mine escape pipes, fly ash transportation, marine dredging pipes, etc.Supply Ability:10 Set/Sets per Month UHMWPE Pipe Extrusion Mahcine LinePackaging Details:Usually we use a wrapping film to wrap the machine, then fix the machine with a wire rope, or use wood packaging according to your needs.Technical Parameters:Extruder modelSJ-75/20SJ-90/20SJ-150/20SJ-200/20SJ-240/20Pipe OD range40-89mm90-159mm160-500mm500-800mm800-1200mmMotor power15Kw18.5Kw30Kw55Kw75KwOutput(kg/h)Bracket lengthAccording by clients needTotal power<30<45<65<8

Main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements. Main production specificationEXTRUDERSJ-30/25SJ-45/30SJ-50/28SJ-55/28SJ-65/25SCREW DIAMETER30MM45MM50MM55MM65MMOUTPUT(KG/H)850609555PRODUCTMICRO-SPRAY BELTMOLDING WAYDOWN-BLOWING

Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.

With the reduction of water supply and the increasing emphasis on the effective use of resources, irrigation technology is being developed in order to use fewer resources. Although the initial capital cost of the latest equipment and software may be high, its improved efficiency, higher output, and reduced water consumption are invincible.Therefore, reducing the irrigated area cannot solve the problem of water shortage.

Production line advantages1.Using high-quality,high tensile-strength PE raw material;2.It is non-toxic,odorless,anti-aging,lightweight and long serivce life;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.