garden grass irrigation hose extruder-manufacture,factory,supplier from China

On November 5, 2024, HWYAA Company welcomed two batches of domestic customers from Henan and Qingdao. The customers came mainly to inspect our prefabricated hole water hose equipment. With enthusiasm and professional explanations, the company showed the advanced performance and excellent quality of the prefabricated hole water hose equipment to the customers.

The cooling method of the extruder. Extruders with a screw diameter greater than 45mm are equipped with a barrel cooling device. The diameter of the small extruder is less than 45 mm, because the barrel contains less plastic. The remaining heat can be diffused by convection between the barrel and the surrounding medium air. Therefore, the outside of the high-speed extruder usually does not have a barrel with a cooling device.Cylinder cooling methods are generally divided into air cooling and water cooling.1. Wind cooling.The air cooler mainly adopts air cooling.

ExtruderThe extruder is one of the important core equipment of the polyethylene pipe production line. In the processing of polyethylene pipes, the most widely used host is a single-screw extruder.Single screw extruder is a kind of machine developed in recent decades. For many domestic enterprises, the design of single screw extruder is still based on traditional design theory.

On November 27th, HWYAA Company witnessed a wave of inspection and exchange activities, receiving client teams from India, Angola, and Tajikistan.The client interested in the braided heat-sealing water hose and micro-sprinkler hose production line from India, considering the demand for efficient irrigation equipment in Indian agriculture, after learning about HWYAA's product technical parameters, manufacturing processes and application cases, discussed with technical experts about customizing the production line according to local agricultural characteristics. The client of the flat d

How to reduce the energy consumption of the extruder? PVC pipe production equipment manufacturers believe that it is necessary to carefully analyze the energy consumption of the extruder: the energy consumption of the extruder refers to the electric energy consumed by a unit mass of plastic product below kwh/kg. According to the input and output, the energy consumption of the extruder can be divided into two types: 1. 77% of the energy input is driven by energy motors and related components, 22.8% of the barrel, head and cooling input are driven by external equipment, and 0.2% about.

The  diameter of the strip is controlled by the diameter management tool to make the measurement and manipulation of the strip diameter accurate and stable, and the main machine motor, the workpiece and the tractor  adopt a reliable frequency.2. Conversion control system and features of easy adjustment, reliable performance, stable working conditions and low wear 3. The extruder body and screw use nitriding alloy materials, which feature high hardness, high water resistance and long service life. 4.

It is understood that Jining City is currently in short supply of water resources. In recent years, the city's annual water consumption has reached 4.6 billion cubic meters, with a per capita water consumption of 558 cubic meters, which is lower than 25% of the national average. It is an area with severe water shortage.

On October 20, we received two groups of customers. One group was from Turkey who came to view our new technology production line of prefabricated hole flat-laid water hoses. The other group was from Algeria who came to see our strip drip irrigation tape production line. Recently, our one-step prefabricated hole water hose has received extensive attention from domestic and foreign customers. At present, our company's technology is leading in China, and the entire production line is independently developed and produced, ensuring the compatibility and smoothness of the equipment.

The promotion of water-saving irrigation equipment can effectively irrigate water and improve the utilization rate of water resources. Water-saving irrigation has advantages and limitations.Its advantages are as follows:1. Save effortWater-saving irrigation equipment can save more than 90% of the labor. Due to inflation and other reasons, workers’ wages have risen sharply, labor costs are also increasing, and it is very difficult to hire workers. After adopting water-saving irrigation equipment, the controller can automatically control solenoid valves and pumps, which can be a lot of labor.2.

The extrusion system includes screw, cylinder, hopper, head and die. The plastic of the plastic extruder is plasticized into a uniform melt through the extrusion system, and under the pressure established in this process, the screw is continuously extruded out of the head.Screw: It is the main component of the extruder, which is directly related to the application range and productivity of the extruder.

There are many types of single-layer plastic tubes, and many types of products can be divided from soft hardness. In general, the plastic hose and plastic hard tersures are mainly different in the same case of the formula. So the plastic tube we must formulate the equipment when producing. For example, the production equipment used by the PVC plastic hose and plastic hard tersures is different from the production equipment and production processes. Plastic tube we must develop the mold according to the size of the product, then select the model of the device.

In recent years, with the acceleration of my country’s urbanization process, and with the strong support of relevant national policies, the demand for water conservancy, transportation, residential construction and various agricultural water-saving irrigation equipment has continued to increase.