drip irrigation pipe making machine cost-manufacture,factory,supplier from China

(Total 24 Products for drip irrigation pipe making machine cost)
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contacta ahora
Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.
  Contacta ahora
PVC Pipe Extrusion Line                          ItemNameSpecificationQuantity 1Conical double screw extruderSJSZ65/1321set2Die head & mould1 set3Stainless steel vacuum calibrating tank160x 6m1 set4Caterpillar haul-off machine3kw1 set5Planetary cutter2.2kw1 set6Stacker 6m1 set8Belling machine1 set9MixerSRL-Z200/5001 set10Loader for mixerZD-11 set11CrusherSWP4001 set12Laser printer1 set  PVC pipe production line introduction1.
  Contacta ahora
With the reduction of water supply and the increasing emphasis on the effective use of resources, irrigation technology is being developed in order to use fewer resources. Although the initial capital cost of the latest equipment and software may be high, its improved efficiency, higher output, and reduced water consumption are invincible.Therefore, reducing the irrigated area cannot solve the problem of water shortage.
  Contacta ahora
The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu
  Contacta ahora
The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contacta ahora
Plastic pipe making machine: It is mainly composed of electrical control production-cabinet-rolling machine-pump-cooling water tank-collection and other parts, which can produce various styles and models of plastic pipes.It is equipped with a special single-screw extruder for polyolefin, which has the characteristics of high-speed foundation and high-speed speed.Professional separate mixing screw for polyolefin.SpecificationPipe diameter12mm16mm20mmWall thickness0.15-0.5mm0.15-0.5mm0.15-0.5mmTolerance±0.05mm±0.05mm±0.05mmApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-scre
  Contacta ahora
main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid
  Contacta ahora
The inlaid flat emitter drip irrigation tape production line is developde by the combination of our own techniques and advanced technologies introduced from foreign countries.The quality of the tape is quite satisfactory.
  Contacta ahora
Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contacta ahora
Uhmwpe pipe making machine features1. According to our years of experiment and practice, the small screw pitch and big screw diameter are adopted for our UHMWPE pipe extrusion line. The production line can melt the UHMWPE, whose melt index is near 0, and slowly extrude it continuously.2. Our UHMWPE pipe extruder, comparing with normal plastic pipe extrusion machine, doesn’t need the cooling fan for the spiral barrel. Each section of the UHMWPE pipe extrusion machine comes with an independent control system, so the temperature precision and energy efficiency are both great.
  Contacta ahora
Hight-efficiency single screw extruder has 8 strandard sizes:Φ30, Φ45, Φ65, Φ75, Φ90, Φ105, Φ120, Φ150mm, and the L/D ratio is 30:1D-37:1D Effective length. All the equipments are controlled by the PLC/PCC smart modular, further more the automatic control, real-time data record and closed-loop control are realizd. The advantage are high output, high adaptability for differnt raw material, highly stable good-quality extrusion and soon.HDPE pipe features:1.
  Contacta ahora
Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.
  Contacta ahora
The inlaid cylindrical emitter drip irrigation pipe production line is developed by the combination of our own techniques andadvanced technologies introduced from foreign countries.Product DescriptionTape Diameter12/16/20mmTape Wall Thickness0.6-1.0mmExtruderSJ-75/33Production Speed50m/min(300mm space)PunchingServo motorExtruding Capacity120KgApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Material:38CrMoALAScrew diameter (mm):75 mmScrew L/D Ratio:33:01:00Screw Speed (rpm):90 rpmShowroom Location:India, Mexico, Russia, South Korea, South Africa, UkrainePlace of
  Contacta ahora
Main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements. Main production specificationEXTRUDERSJ-30/25SJ-45/30SJ-50/28SJ-55/28SJ-65/25SCREW DIAMETER30MM45MM50MM55MM65MMOUTPUT(KG/H)850609555PRODUCTMICRO-SPRAY BELTMOLDING WAYDOWN-BLOWING
  Contacta ahora
According to many years of plastic machinery development and design experience, in the introduction of foreign advancedtechnology and digestion and absorption, on the basis of self-developed HDPE pipe production line.
  Contacta ahora
Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.
  Contacta ahora
Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l
  Contacta ahora
product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.
  Contacta ahora
Pipe ApplicationsMine industry.Tailings and mud transport, underground filling pipeline.Coal industry.Coal mine  gas pipe, water supply and drain pipe, ventilation pipes, grouting pipe, slime water in coal washer plant, coal slurry pipelines.Sea or lake salt chemical industry.Sea salt, brine transport pipeline.Thermal power.Fly coal ash, chemical water, recycled water transport pipeline.Petrochemical.Corrosive medium or crude oil pipeline.Food processing.Water and material delivery pipeline.River dredging.Dredging, pumping sands conveying pipe.Public utilities.Sewage discharge, water supp
  Contacta ahora
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contacta ahora
Short description1. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.2.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.3.Our plastic making machine can make many kinds of plastic productions l
  Contacta ahora
Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.
  Contacta ahora
Drip irrigation tape production line This equipment is mainly composed of a high-speed nozzle machine, a diameter measuring control tube system, a hot press forming machine, a cutter dividing machine, an air intake machine, and a coiling machine. It has the characteristics of simple operation, winding control, high production efficiency and energy saving.
  Contacta ahora
Relate News
UHMWPE (ultra-high molecular weight) pipe making machine delivery to Ukraine kyiv .Hope everything will be getting better .
During the period from December 4th to 7th, HWYAA's fourth-generation strip-attached drip irrigation tape manufacturing machine and one-step formed prefabricated hole flat hose manufacturing machine, developed this year, made a remarkable appearance and received extensive recognition at PLASTEURASIA 2024. The fourth-generation inlaid strip-attached drip emitter drip irrigation T tape making machine has remarkable advantages.
On July 29, 2024, HWYAA plastic machinery welcomed Brazilian customers to visit the falt drip irrigation tape making machine. HWYAA Plastic Machinery is renowned for its advanced technology and excellent quality. This visit demonstrated the attention from the international market. During the visit, professional technicians elaborated on the production line process, technical advantages, and quality control system.
We tested a flat drip irrigation pipe production line successfully for our customer from Uzbekistan. The production speed of this line is 120/min . All PLC and servo adopts Siemens brand . So the production line is very stable . Huaya- the most professional manufacturer of drip irrigation pipe production lines . If you have any questions , pls feel free to contact us .Doubel station haul off ,punching device and inspector with alarm systemDoube station coiling machine ,automatic cut ,automatic change rolles
Water-saving irrigation refers to irrigating the largest area of crops with the minimum amount of water, so as to achieve the purpose of increasing agricultural output and income from agricultural planting. At present, there are many water-saving irrigation methods, such as furrow irrigation, sprinkler irrigation and drip irrigation, which can not only greatly improve the utilization rate of water resources, but also save agricultural planting time and cost.
On Septembe 5th, the CEO from Newtech ,Pakistan visited our factory . The customer was very interested in our drip irrigation pipe production lines and HDPE pipe making machines.Hope we can cooperate with Newtech in future soon .Newtech was established in 2000, after demand for quality pipes and allied fittings increased systematically. Today, it is a prominent player in the pipe manufacturing industry and has become synonymous with the term quality assurance.
As a plastic machinery manufacturer, HWYAA is committed to providing high-quality blown film machines, fully automatic irrigation pipe production lines, and solutions to meet customer needs. In the past year, we have achieved proud accomplishments, launching advanced equipment and gaining recognition from our customers. Looking ahead, we will continue to innovate and improve, delivering high-quality products and services to our customers.Wishing everyone a healthy, happy, and successful New Year!HWYAA Plastic Machinery
Usually when we use the pipe production equipment, we often neglect the maintenance and maintenance, so today I will teach you how to clean some details of the pipe production equipment. The pipeline cleaning of pipe production equipment should pay attention to the removal of oil on the surface of the workpiece. During the maintenance process of pipe production equipment, it is often necessary to clean up the oil stains on its surface.The pipeline cleaning of pipe production equipment should pay attention to the removal of oil on the surface of the workpiece.
The PVC pipe production line has a history of nearly 70 years. Due to the characteristics of high strength and low cost, PVC pipes have been widely used worldwide. However, for a period of time, the performance level of PVC pipe systems has not improved significantly, and the growth rate has slowed down in some countries and application fields.The domestic PVC piping system has formed a huge scale, with an annual output of more than one million tons, but it still stays within the scope of traditional PVC-U.
The name of the ultra-high polymer pipe equipment is (UHMW-PE) non-metallic pipe, which should be a plastic product. The raw material of the polymer pipe is polyethylene, but the amount of polymer is much higher than that of ordinary polymers, and the performance is better than ordinary polymers, for example : Wear resistance, corrosion resistance, impact resistance, yield strength and breaking strength, etc.
Performance characteristics of PVC pipe production equipment:1. Light weight, convenient loading and unloading: PVC pipe is light in material, convenient to carry and construct, and save effort.2. Excellent chemical resistance: PVC pipes are acid-resistant, alkali-resistant, and corrosion-resistant, suitable for the chemical industry.3. Low fluid resistance: The wall surface of the PVC pipe is smooth and the fluid resistance is low. Its roughness coefficient is only 0.009, which is lower than other pipes. Under the same flow rate, the pipe diameter can be reduced.4.