Drip Irrigation Pe Hose Making Extruder-manufacture,factory,supplier from China

(Total 24 Products for Drip Irrigation Pe Hose Making Extruder)
Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.
  Contacta ahora
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contacta ahora
1. The goods are packed in accordance with requirements of the manufacturing plant and standards of the Chinese People's Republic.2. Each place be fixed in accordance to the particularities of the goods.
  Contacta ahora
As the viscosity of UHMW-PE molten state reaches up to 108Pa*s, liquidity is poor, and melt index is almost zero, so UHMW-PE is hard to be processed by general mechanical processing method.
  Contacta ahora
Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contacta ahora
The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contacta ahora
production line advantages1. It is non-toxic,odorless,anti-aging,lightweight and long serivce life;2.Using high-quality,high tensile-strength PE raw material;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.
  Contacta ahora
Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.
  Contacta ahora
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contacta ahora
Pipe AdvantagesHigh wear resistance:It's 4-7 times of steel pipes, 3times of HDPE pipes, 4 times of nylon pipes.
  Contacta ahora
Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l
  Contacta ahora
The inlaid cylindrical emitter drip irrigation pipe production line is developed by the combination of our own techniques andadvanced technologies introduced from foreign countries.Product DescriptionTape Diameter12/16/20mmTape Wall Thickness0.6-1.0mmExtruderSJ-75/33Production Speed50m/min(300mm space)PunchingServo motorExtruding Capacity120KgApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Material:38CrMoALAScrew diameter (mm):75 mmScrew L/D Ratio:33:01:00Screw Speed (rpm):90 rpmShowroom Location:India, Mexico, Russia, South Korea, South Africa, UkrainePlace of
  Contacta ahora
1.    Product introductionThe PE Fusion-bonded Woven Tape Manufacturing Machine is a specialized device used for producing PE (Polyethylene) fusion-bonded woven tape. It utilizes the processes of melting, bonding, and weaving to transform the PE material into woven tape. This type of tape is widely used in fields such as agricultural irrigation, construction projectsWe are committed to providing high-quality woven belt product line that are widely used in various fields such as industrial manufacturing, construction, agriculture, and transportation.
  Contacta ahora
The inlaid flat emitter drip irrigation tape production line is developde by the combination of our own techniques and advanced technologies introduced from foreign countries.The quality of the tape is quite satisfactory.
  Contacta ahora
Short description1. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.2.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.3.Our plastic making machine can make many kinds of plastic productions l
  Contacta ahora
PRODUCTION LINE DESCRIPTIONSThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws. This production line is equipped with cutter (saw web or planetary).
  Contacta ahora
Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.
  Contacta ahora
Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.
  Contacta ahora
Plastic pipe making machine: It is mainly composed of electrical control production-cabinet-rolling machine-pump-cooling water tank-collection and other parts, which can produce various styles and models of plastic pipes.It is equipped with a special single-screw extruder for polyolefin, which has the characteristics of high-speed foundation and high-speed speed.Professional separate mixing screw for polyolefin.SpecificationPipe diameter12mm16mm20mmWall thickness0.15-0.5mm0.15-0.5mm0.15-0.5mmTolerance±0.05mm±0.05mm±0.05mmApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-scre
  Contacta ahora
Production line advantages1.Using high-quality,high tensile-strength PE raw material;2.It is non-toxic,odorless,anti-aging,lightweight and long serivce life;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.
  Contacta ahora
The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu
  Contacta ahora
The extrusion line is newly developed based on European technique and systemic study and research of new type pipe production line; It’s suitable for PE,PP and other polyolefine pipes high-speed extrusion.
  Contacta ahora
Uhmwpe pipe making machine features1. According to our years of experiment and practice, the small screw pitch and big screw diameter are adopted for our UHMWPE pipe extrusion line. The production line can melt the UHMWPE, whose melt index is near 0, and slowly extrude it continuously.2. Our UHMWPE pipe extruder, comparing with normal plastic pipe extrusion machine, doesn’t need the cooling fan for the spiral barrel. Each section of the UHMWPE pipe extrusion machine comes with an independent control system, so the temperature precision and energy efficiency are both great.
  Contacta ahora
product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.
  Contacta ahora
Relate News
On November 5, 2024, HWYAA Company welcomed two batches of domestic customers from Henan and Qingdao. The customers came mainly to inspect our prefabricated hole water hose equipment. With enthusiasm and professional explanations, the company showed the advanced performance and excellent quality of the prefabricated hole water hose equipment to the customers.
ExtruderThe extruder is one of the important core equipment of the polyethylene pipe production line. In the processing of polyethylene pipes, the most widely used host is a single-screw extruder.Single screw extruder is a kind of machine developed in recent decades. For many domestic enterprises, the design of single screw extruder is still based on traditional design theory.
The cooling method of the extruder. Extruders with a screw diameter greater than 45mm are equipped with a barrel cooling device. The diameter of the small extruder is less than 45 mm, because the barrel contains less plastic. The remaining heat can be diffused by convection between the barrel and the surrounding medium air. Therefore, the outside of the high-speed extruder usually does not have a barrel with a cooling device.Cylinder cooling methods are generally divided into air cooling and water cooling.1. Wind cooling.The air cooler mainly adopts air cooling.
How to reduce the energy consumption of the extruder? PVC pipe production equipment manufacturers believe that it is necessary to carefully analyze the energy consumption of the extruder: the energy consumption of the extruder refers to the electric energy consumed by a unit mass of plastic product below kwh/kg. According to the input and output, the energy consumption of the extruder can be divided into two types: 1. 77% of the energy input is driven by energy motors and related components, 22.8% of the barrel, head and cooling input are driven by external equipment, and 0.2% about.
The name of the ultra-high polymer pipe equipment is (UHMW-PE) non-metallic pipe, which should be a plastic product. The raw material of the polymer pipe is polyethylene, but the amount of polymer is much higher than that of ordinary polymers, and the performance is better than ordinary polymers, for example : Wear resistance, corrosion resistance, impact resistance, yield strength and breaking strength, etc.
PVC belongs to plastic pipes. Basic plastics, plastic bags, plastic packaging, etc. They are all made of PVC. High density PVC is a thermoplastic resin with high crystallinity and non-polarity.HDPE (HDPE) is milky white in its original state, and polyethylene has good resistance to most household and industrial chemicals. Welding of PE pipes, butt welding of PE pipes, this process offers a very reliable pressure and treatment range: the use of heated pipe ends, called "mirrors", allows the pressure and temperature to be adjusted.
On November 27th, HWYAA Company witnessed a wave of inspection and exchange activities, receiving client teams from India, Angola, and Tajikistan.The client interested in the braided heat-sealing water hose and micro-sprinkler hose production line from India, considering the demand for efficient irrigation equipment in Indian agriculture, after learning about HWYAA's product technical parameters, manufacturing processes and application cases, discussed with technical experts about customizing the production line according to local agricultural characteristics. The client of the flat d
On October 20, we received two groups of customers. One group was from Turkey who came to view our new technology production line of prefabricated hole flat-laid water hoses. The other group was from Algeria who came to see our strip drip irrigation tape production line. Recently, our one-step prefabricated hole water hose has received extensive attention from domestic and foreign customers. At present, our company's technology is leading in China, and the entire production line is independently developed and produced, ensuring the compatibility and smoothness of the equipment.
1.the use of exquisite,excessive tensile-electricity pe uncooked cloth;2.it's far non-poisonous,odorless,anti-ageing,light-weight and long serivce life;3.holes clean and frivolously,have good resistance to jam;4.according to exceptional crops,choosing diferent holes design,sprary impact is right;Five.usingcooperatively with agricultural pumps and occasional strain water pipelines use,saving time and saving water;6.reference to the multi-fountion price,it's miles loose to adjust spraying width,top and vicinity through adjusting the water stress;7.
During the period from December 4th to 7th, HWYAA's fourth-generation strip-attached drip irrigation tape manufacturing machine and one-step formed prefabricated hole flat hose manufacturing machine, developed this year, made a remarkable appearance and received extensive recognition at PLASTEURASIA 2024. The fourth-generation inlaid strip-attached drip emitter drip irrigation T tape making machine has remarkable advantages.
The  diameter of the strip is controlled by the diameter management tool to make the measurement and manipulation of the strip diameter accurate and stable, and the main machine motor, the workpiece and the tractor  adopt a reliable frequency.2. Conversion control system and features of easy adjustment, reliable performance, stable working conditions and low wear 3. The extruder body and screw use nitriding alloy materials, which feature high hardness, high water resistance and long service life. 4.
On Septembe 5th, the CEO from Newtech ,Pakistan visited our factory . The customer was very interested in our drip irrigation pipe production lines and HDPE pipe making machines.Hope we can cooperate with Newtech in future soon .Newtech was established in 2000, after demand for quality pipes and allied fittings increased systematically. Today, it is a prominent player in the pipe manufacturing industry and has become synonymous with the term quality assurance.