commercial drip irrigation systems-manufacture,factory,supplier from China

(Total 24 Products for commercial drip irrigation systems)
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contacta ahora
The inlaid flat emitter drip irrigation tape production line is developde by the combination of our own techniques and advanced technologies introduced from foreign countries.The quality of the tape is quite satisfactory.
  Contacta ahora
Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.
  Contacta ahora
Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contacta ahora
The inlaid flat drip irrigation pipe machine more effectively manages water demand and maintains the irrigation system.This includes precise water application using wetness frontier detectors; smart irrigation technology to improve irrigation efficiency; technology that uses ultrasonic to clean drip pipes to improve efficiency; and improved irrigation system operation and maintenance through farmland geographic information systems.Application:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Speed (rpm):120 rpmShowroom Location:NonePlace of Origin:Shandong, ChinaBrand Name:Hu
  Contacta ahora
Short descriptionLabyrinth type drip irrigation equipment is our company draws on the technical advantages of domestic and foreign equipment combined with my unit technology and the development of a new generation of high-speed thin-walled cylinder-type drip irrigation pipe equipment.
  Contacta ahora
The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.
  Contacta ahora
The inlaid cylindrical emitter drip irrigation pipe production line is developed by the combination of our own techniques andadvanced technologies introduced from foreign countries.Product DescriptionTape Diameter12/16/20mmTape Wall Thickness0.6-1.0mmExtruderSJ-75/33Production Speed50m/min(300mm space)PunchingServo motorExtruding Capacity120KgApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-screwScrew Material:38CrMoALAScrew diameter (mm):75 mmScrew L/D Ratio:33:01:00Screw Speed (rpm):90 rpmShowroom Location:India, Mexico, Russia, South Korea, South Africa, UkrainePlace of
  Contacta ahora
production line advantages1. It is non-toxic,odorless,anti-aging,lightweight and long serivce life;2.Using high-quality,high tensile-strength PE raw material;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.
  Contacta ahora
Drip irrigation system consists of hose fitted with plastic emitters, that permit water to trickle out at a controlled movement without stopping up. The tubing is laid around the plants and trees to get water into their roots. You can go for pre-punched tubing with emitters already installed, or unperforated tubing, which you have to punch holes in and fix emitters in it.
  Contacta ahora
inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.
  Contacta ahora
Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.
  Contacta ahora
product performance and advantagesEasy operationLow maintenanceTake up small areaHigh output capacityLonger life of screw &barrelPP&LD can be processed due to its special screw designAC Invertor & Motor which synchronizes the entire ExtruderLatest technology used to force the melt into the die very effectivelymain technical parametersmodelsj-45/30diameter45mml/d95speed100rpmoutput50kg/hdrive power15heatingdistrict:4power:4central height500/1000emitter max.
  Contacta ahora
1. The goods are packed in accordance with requirements of the manufacturing plant and standards of the Chinese People's Republic.2. Each place be fixed in accordance to the particularities of the goods.
  Contacta ahora
Drip irrigation tape production line This equipment is mainly composed of a high-speed nozzle machine, a diameter measuring control tube system, a hot press forming machine, a cutter dividing machine, an air intake machine, and a coiling machine. It has the characteristics of simple operation, winding control, high production efficiency and energy saving.
  Contacta ahora
Short description1. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.2.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.3.Our plastic making machine can make many kinds of plastic productions l
  Contacta ahora
PRODUCTION LINE DESCRIPTIONSThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws. This production line is equipped with cutter (saw web or planetary).
  Contacta ahora
Production line advantages1.Using high-quality,high tensile-strength PE raw material;2.It is non-toxic,odorless,anti-aging,lightweight and long serivce life;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.
  Contacta ahora
With the reduction of water supply and the increasing emphasis on the effective use of resources, irrigation technology is being developed in order to use fewer resources. Although the initial capital cost of the latest equipment and software may be high, its improved efficiency, higher output, and reduced water consumption are invincible.Therefore, reducing the irrigated area cannot solve the problem of water shortage.
  Contacta ahora
Main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements. Main production specificationEXTRUDERSJ-30/25SJ-45/30SJ-50/28SJ-55/28SJ-65/25SCREW DIAMETER30MM45MM50MM55MM65MMOUTPUT(KG/H)850609555PRODUCTMICRO-SPRAY BELTMOLDING WAYDOWN-BLOWING
  Contacta ahora
1、Technical Data:numberprojectHigh speed line AStandard line B1Dropper belt diameterΦ 16 - Φ 20 mmΦ 16 - Φ 20 mm2Wall thickness0.15 0.60 mm0.15 0.60 mm3Single screw extruderSJ--75/32SJ--65/324Designed rate of production200m/min(300mm spacing)120m/min(300mm spacing)5Center line height1000mm1000mm6Dropper screening speed600 PCS per minute400 PCS per minute7Drop spacing100mm—1500mm200mm—1500mm8Drilling rate600 PCS /min400 PCS /min9Punching modeHigh speed motorHigh speed motor10Dropper tape length per roll500m—1000m500m—1000m11Total installed capacity102Kw84Kw12Maximum extrusion180Kg120Kg13Electri
  Contacta ahora
main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid
  Contacta ahora
Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l
  Contacta ahora
1.    Product introductionThe PE Fusion-bonded Woven Tape Manufacturing Machine is a specialized device used for producing PE (Polyethylene) fusion-bonded woven tape. It utilizes the processes of melting, bonding, and weaving to transform the PE material into woven tape. This type of tape is widely used in fields such as agricultural irrigation, construction projectsWe are committed to providing high-quality woven belt product line that are widely used in various fields such as industrial manufacturing, construction, agriculture, and transportation.
  Contacta ahora
Relate News
Riyadh Convention and Exhibition Centre in Saudi Arabia is a beautiful city and a relatively large convention centre in the region. Hundreds of commercial and non-commercial events related to conventions and exhibitions are held in Riyadh Convention and Exhibition Centre in Saudi Arabia every year. The company is a global event company dedicated to providing one-stop creative brand marketing services in 599 cities in 106 countries.
The Commercial Counselor of the Uzbekistan Embassy visited Huaya companyOn the afternoon of April 17, 2021, the visiting team of the Commercial Counselor of the Uzbekistan Embassy visited our factory and spoke highly of our products and services. The two parties discussed details in an enthusiastic atmosphere and expressed positive optimism on the prospects of future cooperation. Attitude.Uzbekistan has a huge potential market and is one of the overseas markets that Huaya Company focuses on. With the deep friendship of Uzbekistan, Mr.
It is understood that Jining City is currently in short supply of water resources. In recent years, the city's annual water consumption has reached 4.6 billion cubic meters, with a per capita water consumption of 558 cubic meters, which is lower than 25% of the national average. It is an area with severe water shortage.
Water-saving irrigation refers to irrigating the largest area of crops with the minimum amount of water, so as to achieve the purpose of increasing agricultural output and income from agricultural planting. At present, there are many water-saving irrigation methods, such as furrow irrigation, sprinkler irrigation and drip irrigation, which can not only greatly improve the utilization rate of water resources, but also save agricultural planting time and cost.
HWYYA has attracted a lot of attention from the industry by showcasing innovative water-saving irrigation and plumbing equipment at Plastics Saudi Arabia 2023 in Riyadh. The water-saving drip irrigation and piping equipment enables efficient water use and reduces waste.
Our company successfully opened Korean drip irrigation equipment market,after a series of orderly preparatory work , Korean Customer’s drip Irrigation equipment had loaded to shipping, On June 25, 2016.Our company establish a basic trust with customers after 10 months of negotiations.In the process of factory evaluation and equipment acceptance, Korean customers gave a great affirmation to our drip irrigation equipment’s technology and quality.Our company will continue to drip irrigation equipment’s research ,development and production, to meet different needs of all customers a
On Septembe 5th, the CEO from Newtech ,Pakistan visited our factory . The customer was very interested in our drip irrigation pipe production lines and HDPE pipe making machines.Hope we can cooperate with Newtech in future soon .Newtech was established in 2000, after demand for quality pipes and allied fittings increased systematically. Today, it is a prominent player in the pipe manufacturing industry and has become synonymous with the term quality assurance.
I believe that many of my friends have heard of drip irrigation tapes and water-saving irrigation equipment, and want to try whether they are good or not, but if you want to play an ideal use effect, you must first learn the correct installation method, so today I will follow Let's learn about the correct installation method of drip tape.1. The plot where drip irrigation equipment is installed must be well cultivated and the stubble must be removed. Stubble, rocks, weeds, etc. are easy to break the drip irrigation belt to support the mulch.
Do you know how to install drip tape correctly? Let’s take a look with the editor today!1. The plot where drip irrigation equipment is installed must be well cultivated and the stubble must be removed. Stubble, rocks, weeds, etc. are easy to break the drip irrigation belt to support the mulch. Water vapor is generated in the mulch to form a lens effect.2. When installing, the staff should carefully read the installation instructions of each component, and connect each component according to the correct installation method.3.
On August 9, 2024, our factory welcomed distinguished customers from Algeria who came specially to visit our factory's strip drip irrigation tape production line.The strip drip irrigation tape production line is one of the core production facilities of our factory, which has attracted much attention for its efficient, precise and high-quality production capacity.During the visit, our professional staff introduced the production process, technical characteristics and strict quality control system of the production line to the customers in detail.
The promotion of water-saving irrigation equipment can effectively irrigate water and improve the utilization rate of water resources. Water-saving irrigation has advantages and limitations.Its advantages are as follows:1. Save effortWater-saving irrigation equipment can save more than 90% of the labor. Due to inflation and other reasons, workers’ wages have risen sharply, labor costs are also increasing, and it is very difficult to hire workers. After adopting water-saving irrigation equipment, the controller can automatically control solenoid valves and pumps, which can be a lot of labor.2.
Plastic pipes have been used in water supply and drainage systems in developed countries in Europe and America for more than 70 years. It has become the norm for production technology, quality standards, design and construction. There are many varieties, and it has been widely used in developed countries and regions such as Europe and the United States. In China, although the plastic pipe industry started late, it has developed rapidly. The production of plastic pipes began in the 1970s, and the application of plastic pipes in engineering construction began in the early 1980s.